Table of Contents
Advertisement
5-3
Installing Hard Drives
2
The SC119 chassis supports eight hot-swappable hard drives, so it is not necessary
to power-down the server when replacing hard drives. Only enterprise level SAS or
SATA hard drives are recommended for use in Supermicro chassis.
Removing Hard Drive Carriers from the Chassis
1. Press the release button on the drive carrier. This extends the drive carrier
handle.
2. Use the handle to pull the drive out of the chassis.
Chapter 5 Chassis Setup and Maintenance
1
Figure 5-2: Removing a Hard Drive
5-3
Advertisement
Table of Contents
