Outer Rails - Supero SC119TQ-R700UB User Manual

SC119 Chassis Manual
Secure to the
Front of the Rack

Outer Rails

Installing the Outer Rails to the Rack
1. Attach the shorter outer rail to the outside of the longer outer rail. You must
align the pins with the slides. Both bracket ends must face the same direction.
2. Adjust the outer rails so that they fit snugly within the rack.
3. Secure the longer outer rail to the front of the rack with two screws.
4. Secure the shorter outer rail to the rear rack with three screws.
5. Repeat steps 1-4 for the remaining outer rail.
Figure 6-4: Installing the Outer Rails to the Server Rack
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Attach Outer
1
1
RailsTogether
Figure 6-3: Assembling the Outer Rails
1
3
6-6
Secure to the Rear
of the Rack
4