SC119 Chassis Manual
5-2
Removing the Chassis Cover and Front Bezel
3
Removing the Chassis Cover:
1. Power down the system and disconnect the power cords from the rear of the
power supplies.
2. Remove the screws securing the top cover to the chassis.
3. Slide the cover toward the rear of the chassis.
4. Lift the cover up and off the chassis.
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and
prevent overheating.
Figure 5-1: Removing the Chassis Cover
4
5-2