Table of Contents
Advertisement
4 Carefully remove the document either from
the front or the back.
5 Close the scanner cover on the left and right,
making sure it clicks into place.
6 Close the panel so that it also clicks into
place.
7 Insert paper (see Installation / Loading pa-
per).
Service code
Function 45 Service code is used to delete some
or all of the settings you have changed on the fax
machine since it was supplied from the factory.
This function enables you to partially or fully
reconfi gure your device. It is especially helpful if
you have modifi ed settings but fi nd that your fax
machine does not respond as expected.
v Only use this function when absolutely
necessary!
If you are satisfi ed with your changes to the fac-
tory settings you should not use this function.
After deleting some or all of your custom settings
please rerun Easy Install.
The following codes are at your disposal:
Code No. 7117
This code erases all your modifi cations to the fac-
tory settings. The fax machine will therefore react
in exactly the same way as on fi rst installation.
Code No. 7140
This code deletes all the settings and data you
have entered on your fax machine with the ex-
ception of the following:
• received fax messages
• stored SMS messages
• stored telephone book numbers
• your name
• your telephone number
Example for using a service code:
1 Select function 45 by pressing M, 45 and
OK on the fax machine. Enter the service
code (7117 or 7140). Press OK.
2 With u you can select whether you really
want to delete your settings. Confi rm with
OK. Your fax machine will be reset to its
original confi guration.
Care
Before opening the fax machine, make sure that
you are electrically discharged by e. g. touching
the metal housing of a grounded appliance, a
water pipe or radiator.
Use a soft, fl uff-free cloth. You can also use a special
cloth for cleaning fax machines (see Delivery Serv-
ice). Never use liquid or gaseous cleaning agents
(sprays, scouring agents, polishes etc.). Do not
allow any moisture to penetrate inside the device.
Clean the scanner glass
1 Open the paper feed fl ap and carefully pull
out the paper. Close the fl ap again.
35
Advertisement
Table of Contents
