Henny Penny OFG-392 Technical Manual page 27

2-9. GAS CONTROL VALVE
(Continued)
1003
4. Remove left side panel.
5. Remove control panel.
6. Unscrew nut from inlet line from the control valve.
7. Remove the bracket from behind the gas control valve.
8. Remove pilot light tube from gas control valve.
9. Loosen fittings from tee and pull control valve assembly from
the unit.
10. Remove the fittings from the defective control valve, and place
fittings on new valve.
12. Reassemble in reverse order.
Model OFG- 390
2-10