Optional Swivel Belt Clip; Attaching; Detaching - Icom IC-M73 Instruction Manual

■ Attaching

1 Screw the base clip to the back of the transceiver using
the two screws , as shown to the right.
(supplied)
Supplied screws
2 Clip the belt clip over your belt and insert the transceiver.
3 Once the transceiver is locked in place, it swivels.

OPTIONAL SWIVEL BELT CLIP

FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com

■ Detaching

 Turn the transceiver upside down in the direction of the
arrow and pull out from the belt clip.
R CAUTION: HOLD THE TRANSCEIVER TIGHTLY WHEN
HANGING OR DETACHING THE TRANSCEIVER FROM
THE BELT CLIP.
Otherwise the transceiver may not be attached to the belt
clip or swiveled properly if the transceiver is accidentally
dropped and the base clip is scratched or damaged.
10
9
10
35