Section 1 Before Using; Attaching The Belt Clip; Battery Charging - Icom IP110H Operating Manual

1
BEFORE USING

Attaching the belt clip

Clip cover Before attaching the belt clip, remove the
clip cover�
1 1
1 1
Supplied
belt clip
2 2
2 2
Slide the belt clip in the direction of the
arrow until the belt clip locks in place, and
makes a 'click' sound�
TIP: When attaching a hand strap (User supplied)
1 1
Clip cover
2 2
1 1
2 2
1 1
2 2
1 1
When removing the belt clip, lift
2 2
the tab up 1, and slide the belt
clip in the direction of the arrow
2�
Hand strap (User supplied)

Battery charging

Fully charge the transceiver before using for the
first time, or if it has not been used for more than 2
months�
• The charger automatically restarts charging when the
battery voltage drops�
• Disconnect the AC adapter from the outlet when the
charger is not in use�
CAUTION: Read the ‛Battery caution' and ‛Charging
caution' on INSTRUCTIONS (supplied with the
transceiver) before charging�
Status indicator
Lights blue: Charging
Not lit:
Connector
cover
Turn OFF
NOTE:
• Use a 5 V/2 A output AC adapter�
• The charging time may differ, depending on the AC
adapter� When you use a low output AC adapter, it may
take longer to charge, or the transceiver may not be
charged�
• Before using the AC adapter, thoroughly read its
instructions�
L You can charge up to 4 IP110Hs together by
using 4 BC-257 optional chargers and the BC-228
optional AC adapter� See page 5-4 for details�
1-2
Charged
Supplied USB cable
AC adapter (User supplied)