Impex MWM 1800 Owner's Manual page 8

STEP 4 (See Diagram 4)
A.) Attach the Left Vertical Beam (#17) to the Left Base Frame (#15). Secure it with two M10 x
2 ¾" Carriage Bolts (#70),
B.) Attach the Left Upper Frame (#18) to the Left Vertical Beam (#17), and the Right Upper
Frame (#7). Secure the Frame to the Vertical Beam with one Pulley Bracket (#20), two M10
x 2 ¾" Carriage Bolts (#70), two
Secure the Left Frame to the Right Frame with one Bracket (#55), two M10 x 2 ¾" Carriage
Bolts (#70), two
C.) Attach the Left Seat Support (#14) to the Left Base Frame (#15) and the Left Vertical Beam
(#17). Secure the Seat Support to the Left Base Frame with one M10 x 2 ¾" Carriage Bolt
(#70), ¾" Washer (#50), and M10 Aircraft Nut (#81). Secure the Seat Support to the
Vertical Beam with one Bracket (#55), two M10 x 2 ¾" Carriage Bolts (#70),
(#50), and M10 Aircraft Nuts (#81).
D.) Attach the Leg Developer (#13) to the bracket on the Left Seat Support (#14). Secure it with
one M10 x 2" Axle (#91), two M10 x ¾" Allen Bolts (#66) and
¾" Washers (#50), and M10 Aircraft Nuts (#81).
¾" Washers (#50), and two M10 Aircraft Nuts (#81).
¾" Washers (#50), and two M10 Aircraft Nuts (#81).
7
¾" Washers
¾" Washers (#50).