Impex MWM 1800 Owner's Manual page 6

STEP 2 (See Diagram 2)
A.) Attach Right Vertical Beam (#6) to the Right Base Frame (#3). Secure it with two M10 x 2
¾" Carriage Bolts (#70),
B.) Attach the Right Seat Support (#2) to the Right Base Frame (#3). Secure it with one M10
x 2 ¾" Carriage Bolt (#70),
C.) Attach the Right Seat Support (#2) to the Right Vertical Beam (#6). Secure it with two
M10 x 2 ¾" Carriage Bolts (#70),
D.) Attach the Leg Press Frame (#1) to the Right Base Frame (#3). Secure it with one M12 x
3" Allen Bolt (#74), two
not over tighten the bolt. Make sure the Leg Press Frame is able to swivel.
E.) Attach the Leg Press Support Frames (#28) to both sides of the Leg Press Frame (#1).
Secure them together with two M10 x 2 ¾" Carriage Bolts (#70),
and M10 Aircraft Nuts (#81).
¾" Washers (#50), and M10 Aircraft Nuts (#81).
¾" Washer (#50), and M10 Aircraft Nut (#81).
¾" Washers (#50), and M10 Aircraft Nuts (#81).
1" Washers (#51), and one M12 Aircraft Nut (#82). NOTE: Do
5
¾" Washers (#50),
DIAGRAM 2