When not disabled, each of the ranges is from 1 min. to 1 hr. except for HDD Power
Down, which ranges from 1 min. to 15 min. and disable.
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable
period of system inactivity. All other devices remain active. Options: Disabled
(default)、1 Min、2 Min、3 Min、4 Min、5 Min、6 Min、7 Min、8 Min、9 Min、10 Min、
11 Min、12 Min、13 Min、14 Min、15Min
Suspend Mode
This item allows you to select the suspend type using the ACPI operating system.
Options: Disabled (default)、1 Min、2 Min、4 Min、6 Min、8 Min、10 Min、20 Min、
30 Min、40 Min、1 Hour
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
Options: Suspend→Off (default), Always On.
Video Off Method
This option determines the manner in which the monitor is goes blank.
Options: V/H SYNC+Blank (default)
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen: This option only writes blanks to the video buffer.
DPMS Support: Initial display power management signaling.
Modem Use IRQ
This determines the modem's IRQ. Options: 3 (default)、4、5、7、9、10、11、NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has "hung." Options: Delay 4 Sec, Instant-Off
(default).
Wake Up Control
If you highlight the literal "Press Enter" next to the "Wake Up Control" label and then
press the enter key, it will display a submenu with the following options:
KX400+ series mainboard
55