CyberData 11233 Operation Manual page 3

Revision Information
Revision 930622F, which corresponds to firmware version 7.0.0, was released on September 11,
2013, and has the following changes:
CyberData Corporation
• Updates Section 1.2, "Product
• Adds the following text to
"The user can export and edit the device's configuration (in XML format), and then reload it
to a device (or devices) instead of making changes through the web
• Adds the DTMF duration (milliseconds)
Parameters".
• Updates the description for the
Parameters".
• Adds the Bypass DTMF Menus (Go straight to page)
Configuration Parameters".
• Adds the Send pre-configured DTMF for Analog
Parameters".
• Adds the Zone (field)
• Adds the Zone (box) setting to
• Adds the Manual DTMF Entry for Analog Zone
Parameters".
• Adds the VLAN ID (0-4095)
• Adds the VLAN Priority (0-7)
• Adds the following text to
"Note: The device supports 802.11Q VLAN tagging support. The switch port connected to
the device will need to be in "trunking mode" for the VLAN tags to
• Adds the Download Protocol
Parameters".
• Adds the Disable rport Discovery
• Adds the Terminate call after delay (in seconds)
Parameters".
• Adds the Buffer setting to
• Adds the Beep setting to
• Adds the Enter Zone
• Adds the Autoprovision at time (HHMMSS)
Configuration Parameters".
• Adds the Autoprovision when idle (in minutes > 10)
Configuration Parameters".
• Adds the NTP Server
• Adds the Posix Timezone String
Parameters".
• Adds the Set Time with External NTP Server on boot
"Autoprovisioning Configuration
• Adds the Periodically update with time server
Configuration Parameters".
features".
Table 2-5, "Home Page
setting to
Beep on page
setting to Table 2-6, "Device Configuration
Table 2-6, "Device Configuration
setting to Table 2-7, "Network Configuration
setting to Table 2-7, "Network Configuration
Table 2-7, "Network Configuration
setting to Table 2-14, "Autoprovisioning Configuration
setting to Table 2-8, "SIP Configuration
Table 2-9, "Multicast Configuration
Table 2-9, "Multicast Configuration
setting to Table 2-12, "Audio Configuration
setting to
setting to Table 2-14, "Autoprovisioning Configuration
setting to Table 2-14, "Autoprovisioning Configuration
Parameters".
930622F
Overview""
interface."
Table 2-6, "Device Configuration
setting inTable 2-6, "Device Configuration
setting to Table 2-6, "Device
setting to Table 2-6, "Device Configuration
Parameters".
Parameters".
setting to Table 2-6, "Device Configuration
Parameters""
propagate."
setting to Table 2-8, "SIP Configuration
Parameters".
Parameters".
Parameters".
Table 2-14, "Autoprovisioning
setting to Table 2-14, "Autoprovisioning
setting to Table 2-14,
setting to Table 2-14, "Autoprovisioning
Parameters".
Parameters".
Parameters".
Parameters".
Operations Guide