Module Type; Transparent/Profile Mode - ABB RECA-01 User Manual

30
The RECA-01 configuration parameters
Par. Parameter name Alternative settings
no.
1

MODULE TYPE

2 TRANSPARENT/
PROFILE MODE
1 MODULE TYPE
This parameter shows the module type as detected by the drive.
The value cannot be adjusted by the user.
If this parameter is undefined, the communication between the
drive and the module has not been established.

2 TRANSPARENT/PROFILE MODE

This parameter is used for choosing either the transparent (ABB
Drives) or the DSP 402 communication profile. This selection can
also be changed with CoE object 0×2400 (hex).
Drive configuration
(Read-only)
(0) Profile mode (DSP 402)
(1) Transparent mode
(ABB Drives)
Default setting
ETHERCAT
(0) Profile mode
(DSP 402)