The Phone Stand - Avaya 9600 Series User Manual

Introduction: Phone Keys

1.9 The Phone Stand

The phones all include a two-position stand that clips to the base of the phone as shown below. Once attached the stand
can be used in either position to change the angle of the phone.
When changing the position of the stand, be sure to check that the stand has locked into the chosen position. A small
plastic peg is located just under the phone's handset. This peg can be reversed to more securely anchor the handset when
the stand places the phone in an upright position.
The angle of the phone can also be adjusted as shown below. The angle of the display on these phones can also be
adjusted.
Other Stands
If the phone needs to be used in a situation other than on a desk, for example wall mounted, a number of other stand
designs are available from Avaya. Contact your system maintainer.
9600 Series Phone User Guide Page 17
IP Office Release 6.1 Issue 02c (28 October 2010)