1.6 The Phone Stand
The phones all include a two-position stand that clips to the base of the phone as shown below. Once attached the stand
can be used in either position to change the angle of the phone.
When changing the position of the stand, be sure to check that the stand has locked into the chosen position. A small
plastic peg is located just under the phone's handset. This peg can be reversed to more securely anchor the handset
when the stand places the phone in an upright position.
On the 1416 and 1616 phones, the angle of the phone display can also be adjusted as shown below.
1408/1416 Phone User Guide
Page 16
IP Office 9.0
15-601040 Issue 07i (06 November 2015)
Comments on this document? infodev@avaya.com