Volume And Sound; Button Clicks; Error Tones; Ringer Volume - Avaya 9600 Series User Manual

17.8 Volume and Sound

This section covers controls that relate to the various sounds that your phone uses and to the volume. These are in
addition to the ringer controls
Button Click
·
110
Turn the phone menu key click on or off.

Error Tones

· 110
Turn the phone menu error tones on or off.

Ringer Volume

·
110
Adjust the volume of the ringer used by the phone.
Handset Volume
·
Adjust the incoming call volume heard through the phone's handset.
Headset Volume
·
Adjust the incoming call volume heard through a headset attached to the phone.
Speaker Volume
·
Adjust the incoming call volume heard through the phone's speaker.
Automatic Gain Control
·
Switch automatic gain control on or off.
Note
The system administrator can set your phone to reset its volume after each call.

17.8.1 Button Clicks

While using the phone menus, the phone can provide a key press confirmation click sound. This can be turned off if it is
annoying.
1. Press the MENU button.
2. Use the up and down
3. Use the up and down
4. Use the up and down
5. Press Change to change the setting between On or Off.
6. When completed, press the Save soft key.
7. Press Back / Exit to exit the menus.
17.8.2 Error Tones
1. Press the MENU button.
2. Use the up and down
3. Use the up and down
4. Use the up and down
4. Press Change to change the setting between On or Off.
5. When completed, press the Save soft key.
6. Press Back / Exit to exit the menus.
17.8.3 Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
1. With the phone idle or ringing, press the
2. Use the + plus and – minus keys to adjust the volume.
3. The display will return to normal after a few seconds.
9600 Series Phone User Guide
IP Office Release 6.1
available.
101
111
111
111
111
arrow keys to highlight Options & Settings. Press Select.
arrow keys to highlight Screen & Sound Options. Press Select.
arrow keys to highlight Button Clicks.
arrow keys to highlight Options & Settings. Press Select.
arrow keys to highlight Screen & Sound Options. Press Select.
arrow keys to highlight Error Tones.
key.
Page 110
Issue 02c (28 October 2010)