Remote Controls - Dish Network Receiver User Manual

Dual Mode
Dual Mode uses TV1 outputs to deliver programming to the nearby TV, and
TV2 outputs to deliver programming to the remote TV(s).
While in Dual Mode, you can use this two-tuner satellite receiver to watch
different programs in two locations:
• Nearby TV—Programming from the receiver is delivered to the TV
near the receiver using starndard audio/video cables.
• Remote TV—Programming from the receiver is delivered to a TV
located in another room using existing in-home coaxial cable.
UHF Antenna
1
2
IR Remote
Control

Remote Controls

Two remote controls come with your receiver:
• An Infrared (IR) remote is provided to control programming for the
nearby TV. This remote is labeled with a green number 1, which
matches similar markings on the receiver's output connections and
in the menus for the nearby TV.
• An Ultra-High Frequency Pro (UHF Pro) remote is provided to
control programming to a remote TV. This remote is labeled with a
blue number 2, which matches similar markings on the receiver's
output connections and in the menus for the remote TV.
High Output
Modulator
Nearby TV Nearby TV
Remote TV
UHF
2
Remote
Control
Existing
Cable
System
About this Receiver
Page 3