Dish Network Receiver User Manual page 5

Proper Care of Your Equipment
• Always handle the receiver carefully. Excessive shock and vibration
can damage the hard drive.
• If the equipment is turned on and needs to be moved, unplug the
equipment and let it sit for at least 30 seconds before moving it.
• The use of accessories or attachments not recommended by the receiver
manufacturer voids the Limited Warranty.
• Do not stack the receiver on top of or below other electronic devices as
this can cause heat build-up and vibration.
On some TVs, the presense of fixed images for extended
periods of time may cause them to be permanently
imprinted on the screen. Consult your TV user guide for
information on whether this is a problem for your TV, what
operating/viewing restrictions apply to avoid this problem,
and associated TV warranty coverage.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the antenna assembly.
• Increase the separation between the equipment.
• Connect the equipment into an outlet on a circuit different from that to
which the DISH Network receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Safety Tips
• The use of accessories or attachments not recommended by the receiver
manufacturer will void the Limited Warranty.
• Make sure that the outdoor parts of the antenna system are grounded in
accordance with local, state, federal, and National Electrical Code
(NEC) requirements.
Page v