Dish Network Receiver User Manual page 75

–
Create a Recurring Timer
described in Setting Up an Automatic Event Timer.
–
Record the Entire Event
of the event.
Setting Up an Automatic Event Timer
1. Select a future program using the
menu or the
Themes
2. Select a
Timer Frequency
3. Select a
Timer Type
4. Select the
Create Timer
5. The
Program Guide
record the event.
Setting Up a Manual Event Timer
1. Press the MENU button.
2. Select the
Timers
3. Select the Create option. The receiver displays the
menu.
Timer
4. Select a
Timer Type
5. Select a
Timer Frequency
6. Select a channel by doing one of the following:
• Highlight a channel using the UP or DOWN ARROW button.
press the SELECT button.
• Enter a channel number using the NUMBER PAD buttons.
—You can set up a timer like the one
—The receiver stops recording at the end
Browse Banner
.
Program Guide
option. Notice that a mark displays in the box.
.
option to save the event timer.
displays which satellite receiver output is scheduled to
option.
option.
option.
,
Create a Manual Event
Then,
Using Timers
Tip: You can edit
and delete timers
from either TV
output.
Tip: Remote
Control 1 is used to
control TV1 menus
on the nearby TV.
Remote Control 2
is used to control
TV2 menus on the
remote TV(s).
Tip: You can edit
and delete timers
from either TV
output.
PAGE
Tip: Use the
UP PAGE
and
DOWN
buttons to
scroll quickly
through the
channel list.
Page 69