Connecting The Receiver To The Phone Line - Dish Network Receiver User Manual

Table of Contents

Advertisement

1.
Press MENU-6-1-5 to open the
2. For
, highlight the number under
TV 1 Out
step 4.
3. Use the UP and DOWN ARROW buttons to change the modulator channel
either
or
. Continue to the next step to set
3
4
you are finished making changes.
4. For
, select either
TV 2 Out
cable channel numbers).
5. Highlight the number under
6. Use the UP and DOWN ARROW buttons to change the modulator channel
to one of the following:
—Select a channel between
Air Mode
Cable Mode
7. Select
to save the changes.
Done
8. Change the channel on your TV(s) to match the channel(s) you selected.
9. If desired to remind you of which TV channel to tune to get satellite
programming, place a channel sticker near or on your TV to indicate the
correct channel.
10. If you changed your
the Recover Button for a Remote TV on page 35.

Connecting the Receiver to the Phone Line

You must keep the receiver connected to an active telephone line. Otherwise,
you may not be able to order pay-per-view programs, use all of the DISH Home
Interactive features, or access other services from DISH.
: You may be able to use a wireless modem jack. However,
Note
this may not support all the features of this receiver, such as Caller ID.
See www.dish.com for compatible modem products.
: If you have a Digital Subscriber Line (DSL), you may have to install a
Note
DSL filter between the receiver's back panel PHONE JACK and the telephone
wall jack to successfully connect with DISH. You can obtain a filter from your
DSL provider or local electronic parts store.
Modulator Setup
(for off-air channel numbers) or
Air
.
TV 2 Out
—Select a channel between
channel, repeat the steps for Programming
TV 2 Out
Connecting the Receiver to the Phone Line
screen.
. For
TV 1 Out
TV 2 Out
or skip to step 7 if
TV 2 Out
Cable
and
.
21
69
and
.
73
125
Tip: It's easier to
set the output
channel from the
opposite TV. For
example, if you are
changing the out-
put on TV1 (nearby
TV), use TV2
(remote TV) to
make the change.
When you save the
changes, simply
remember to
, skip to
change the chan-
nel on the nearby
TV.
(for
Tip: The channel
stickers are located
inside the front
cover of this guide.
Page 37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents