Dish Network Receiver User Manual page 55

3. Select
Enable View
: If you do not want to display programming on any other TV besides
Note
TV1 and you do not want Remote Control 2 to control the receiver, select
. The following screen is displayed on remote TVs when
Disable View
is disabled:
Shared View
4. Select . All of the TVs connected to the satellite receiver are
Done
displaying the same program.
Dual Mode
uses TV1 outputs to deliver programming to the nearby TV and
Dual Mode
TV2 outputs to deliver programming to the remote TV(s). You can tell your
receiver is in
Dual Mode
the menu and other screens will display the following information:
.
because the DUAL front panel indicator will light and
Using Single and Dual Modes
Page 49