Dish Network Receiver User Manual page 54

Chapter 3
Using the System
Page 48
3. Press the SWAP button. The channel that was shown in the PIP window
will now be shown on the full screen.
4. Press the PIP button again to enlarge the
5. Press the PIP button once more to close the
Using Shared View
is a feature of
Shared View
and video outputs to display the same programming as the TV1 outputs. While
using this feature, both the green 1 and blue 2 remotes for your satellite receiver
can control what is displayed on all TVs connected to the system. The following
instructions describe how to enable
1. Make sure the receiver is in
indicator should be lit. If not, press the MODE button the receiver front
panel.
2. Press MENU-6-2 to open the
applicable for
Single Mode
window.
PIP
PIP
that lets you activate the TV2 audio
Single Mode
:
Shared View
. The SINGLE front panel
Single Mode
screen. This Screen is
Shared View
only.
window.