Dish Network Receiver User Manual page 82

Chapter 3
Using the System
Page 76
3. When the
Record Remainder of This Event
the following:
• From TV1, select
• From TV2, select
: When recording using
Note
other TV to cancel your recording.
4. Select one of the following:
• Select to start the recording now.
OK
• Select
Options
–
Stop Recording Manually
press STOP.
–
Extend End Time
–
Create a Recurring Timer
described in Setting Up an Automatic Event Timer.
–
Record the Entire Event
of the event. This selection is available only if the receiver was
tuned to the channel at the beginning of the program.
5. Press GUIDE on the remote. Use the
you want to watch now. Select that program. You are now watching one
program while recording another.
.
TV2
.
TV1
, it is possible for someone at the
Record Plus
to customize the following:
—The receiver will record until you
—You can set the stop time for the recording.
—You can set up a timer like the one
—The receiver stops recording at the end
Program Guide
screen displays, select one of
to find a program that