Dish Network Receiver User Manual page 78

Chapter 3
Using the System
Deleting an Event Timer
Special Considerations When Using Event Timers
Page 72
3. Select the event timer that you want to edit. A mark appears in the box next
to the event timer.
4. Select the option. You may change the
Edit
or . To do this, select each option that you want.
Channel
5. If you want to change the
option to display the
Edit Time
Otherwise, skip to step 8 of this procedure.
6. Use the number buttons to enter the
or PM) and the
End Time
7. Use the NUMBER PAD buttons to enter the
8. Select the
Create Timer
1. Press the MENU button.
2. Select the
option.
Timers
The receiver displays the
3. Select an event timer(s) that you want to delete. A check mark appears in
the box next to the event timer(s).
4. Move the highlight to
•
For Locked Programs
can create an automatic event timer. You can create a manual event timer for
a locked program without entering the password. However, if you do this,
when the event timer operates the receiver may display only an error or
password entry menu.
•
For Pay Per View Programs
before you can create a timer for it.
Timer Type
, the
Start Time End Time
for
Edit Time
Start Time
(this includes selecting AM or PM).
Date
option.
menu.
Timers
and press SELECT on the remote.
Delete
—You must enter the receiver password before you
—You must order a pay per view program
,
Timer Frequency
, or the , select the
Date
menu.
Manual Timer
(this includes selecting AM
.
,