Selecting A Printer Language - Intermec PX4i User Manual

Chapter 1 — Using the Printer

Selecting a Printer Language

4
Your printer comes loaded with different printer command
languages. The first time you start your printer, you are prompted to
select the command language. The printer language you choose
affects the functionality of the printer and how you interact with it.
Printer Command Language Descriptions
Printer
Language Description
Fingerprint Intermec Fingerprint is a BASIC-inspired programming
language you use to design label formats and write
custom printer application software.
Intermec Printer IPL is an easy-to-use programming language that lets you
Language (IPL) design, download, and modify formats.
ZSim ZSim is a Zebra™ interpreter program that interprets ZPL
II or later programs. To setup, configure, and use ZSim,
see the
DSim DSim is a Datamax™ simulation program that runs
Datamax programs. To setup, configure, and use DSim,
see the
To select your printer language
• Press the key that corresponds to the printer language you want to
run on your printer.
Status
F1=FP, F2=IPL
F3=ZSIM, F4=DSIM
F1 F2 F3
F4 F5
Shift
Printer Startup Screen: This screen appears the first time you turn on your
printer.
The language you select automatically runs each time you turn on
your printer.
ZSim Programmer's
DSim Programmer's
PX4i and PX6i High Performance Printer User's Manual
Guide.
Guide.
7 8 9
Pause Setup
4 5 6
Feed Enter
1 2 3
./- 0
Clear