Chapter 1 — Using the Mobile Printer
Understanding the Printer Language
6
There is only one LED on the printer: the Ready-to-Work™ indicator.
Understanding the Ready-to-Work Indicator
Indicator State
Description
Off
When the light is off, it can mean one of several
conditions:
•
•
•
On
The printer is powered on and operating.
Blinking
A blinking light can mean one of several conditions:
•
•
•
Depending on the configuration you ordered, your printer comes
with Intermec Printer Language (IPL), Fingerprint. This manual
contains information for using both printer language.
The current firmware type and version display on the printer screen
when the printer is in Ready mode.
IPL 12.0.0
The Screen of a PB50 and PB51 Running IPL Firmware
The printer is in Standby mode.
The printer is in Info mode.
The printer is in Setup mode.
The printer is out of paper.
The media cover is open.
There is a printer error that requires you to perform an
action. For a list of possible problems, see
"Troubleshooting the Mobile Printer" on page
PB50 and PB51 Mobile Printer User's Guide
54.