Default Configuration; Fingerprint Default Configuration - Intermec PX4i User Manual

Appendix B — Default Settings

Default Configuration

Fingerprint Default Configuration

158
The following tables list the default values of the configuration
commands supported on the printer. If you restore the printer to
factory default settings, the printer uses these values.
The commands are grouped by function and reflect the organization
of the IPL and Fingerprint setup menus. For detailed information on
most of the commands, see the
Reference Manual or the
download both documents from the Intermec web site at
www.intermec.com.
Ser-Com "uart1:" Parameters
Parameter
Baud rate
Character length
Parity
Stop bits
Flow control
RTS/CTS
ENQ/ACK
XON/XOFF; data to host
XON/XOFF; data from host
New line
Receive buffer
Transmit butter
Net-Com "net1:" Parameters
Parameter
New line
Intermec Fingerprint Command
IPL Command Reference
Default Value
9600
8
None
1
Disable
Disable
Disable
Disable
CR/LF
1024 bytes
1024 bytes
Default Value
CR/LF
PX4i and PX6i High Performance Printer User's Manual
Manual. You can