Intermec PX4i User Manual page 164

Appendix A — Specifications
150
Tickets With Gaps (Gap Stock)
Media Width (a)
Printer Measurement
PX4i Maximum
Minimum
PX6i Maximum
Minimum
Copy Length (b)
Measurement
Minimum without LTS 8 mm (0.32 in)
Minimum with LTS
Maximum
Note: Under ideal circumstances, a minimum ticket length of 4 mm
(0.16 in) could be used. It requires the sum of the copy length (b) and
the detection slit height (e) to be larger than 7 mm (0.28 in), that batch
printing is used, and that no pull back of the media is performed.
Intermec does not guarantee that such short tickets will work, but it is
up to users to test this in their unique application.
LSS Detection Position (c)
This position is variable. For help, see
Sensor" on page 121.
Detection Slit Length (d)
The length of the detection slit (excluding corner radii) must be a
minimum of 2.5 mm (0.10 in) on either side of the LSS detection
position (c).
Detection Slit Height (e)
Measurement Value
Maximum 25.0 mm (0.98 in)
Recommended 1.6 mm (0.06 in)
Minimum 1.2 mm (0.05 in)
Value
120 mm (4.72 in)
25.0 mm (1.00 in)
170 mm (6.69 in)
76.0 mm (3.00 in)
Value
12 mm (0.47 in)
6,143 mm (241 in) Depends on SDRAM size.
PX4i and PX6i High Performance Printer User's Manual
"Adjusting the Label Stop