Understanding The Printer Language - Intermec PB22 User Manual

Understanding the Printer Language

PB22/PB32 Mobile Label and Receipt Printer User's Guide
Chapter 1 — Using the PB22/PB32 Mobile Label and Receipt Printer
There is only one LED on the PB22/PB32 printer: the Ready-to-
Work™ indicator.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off When the light is off, it can mean one of several
conditions:
•
•
•
On The PB22/PB32 is turned on and operating.
Blinking A blinking light can mean one of several conditions:
•
•
•
Your PB22/PB32 printer comes with Intermec Printer Language (IPL),
Fingerprint, or Intermec Receipt Protocol (ESC/P). The language you
choose affects the functionality of the printer and how you interact
with it. This manual contains information for using the different
types of printer language.
When the printer is shipped from the factory, the first person to turn
on the printer will have the option of choosing which printer
language to run on the printer.
• Press the appropriate button to choose a language.
FP ESCP
IPL ZSIM
Choosing the Printer Firmware
The printer is in Standby mode.
The printer is in Info mode.
The printer is in Setup mode.
The printer is out of paper.
The media cover is open.
There is a printer error that requires you to perform an
action. For a list of possible problems, see
"Troubleshooting the PB22/PB32" on page 42.
5