Selecting The Printer Language - Intermec PB50 User Manual

Chapter 1 — Using the Mobile Printer

Selecting the Printer Language

6
Understanding the Ready-to-Work Indicator (continued)
Indicator State Description
Blinking When the light is blinking, it means one of the following:
•
•
•
The language you choose affects the functionality of the printer and
how you use it. This manual contains information for using each
printer language.
If your printer has firmware version 11.4.0 or earlier, your printer
comes with one of the following printer languages:
Fingerprint
•
• Intermec Printer Language (IPL)
• ESC/P
Note: If your printer has version 11.4.0 or earlier and you want to run
a simulator language , you can download ZSim, CSim, and DSim from
the Intermec website at www.intermec.com.
If you upgrade your printer firmware to version 11.5.0 or later, your
printer is loaded with all of the following printer languages:
• Fingerprint
• Intermec Printer Language (IPL)
• ESC/P
• ZSim
• CSim
• DSim
The first time you start your printer after you upgrade your firmware,
you are prompted to select a printer language. The language you select
automatically runs each time you turn on your printer.
The printer is out of paper.
The media cover is open.
There is a printer error that requires you to perform an
action. For a list of possible problems, see
"Troubleshooting the Mobile Printer" on page
PB50 and PB51 Mobile Printer User Guide
58.