Table of Contents
Advertisement
Chapter 7: AMI BIOS
the system. Select Disabled to disable ASPM support. The options are Disabled,
Force L0s, and Auto.
Warning: Enabling ASPM support may cause some PCI-E devices to fail!
Slot 1, 2, 3, 4, 5, 6, 7 OPROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slots specified above. The options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. The options are PXE and iSCSI.
Load Onboard LAN1 OPROM, Load Onboard LAN2 OPROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM. This is to boot
the computer using a network device. The default setting for LAN1 Option ROM is
Enabled, and the default setting for LAN2 Option ROM is Disabled.
Load Onboard SAS OPROM
Select Enabled to enable the onboard SAS Option ROM. This is to boot the com-
puter using a SAS device. The default setting for SAS Option ROM is Enabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
Serial Port Console Redirection
COM 1
These two submenus allow the user to configure the following Console Redirection
settings for a COM Port specified by the user.
7-19
Advertisement
Table of Contents
