Bmc Network Configuration - Supero SUPERSERVER 6027AX-TRF User Manual

S S
UPER ERVER 6027AX-TRF/6027AX-72RF User's Manual
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. The options are Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Enabled and Disabled.
Note: After making changes on a setting, be sure to reboot the system for
the changes to take effect.

BMC Network Configuration


Update IPMI LAN Configuration
This feature allows the BIOS to implement any IP/MAC address changes at the
next system boot. If the option is set to Yes, any changes made to the settings
below will take effect when the system is rebooted. The options are No and Yes..
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and enter
it to the system manually in the field. If DHCP is selected, the BIOS will search for
a DHCP (Dynamic Host Configuration Protocol) server in the network that it is at-
tached to and request the next available IP address for this computer. The options
for LAN 1 are DHCP and Static. The options for LAN 2 are Unspecified, Static,
DHCP, Dynamic-Loaded by BIOS, and Dynamic-BMC running Other Protocol.
The following items are assigned IP addresses automatically if DHCP is selected,
or can be configured manually if Static is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
7-30