Table of Contents
Advertisement
S
S
UPER
ERVER 6027AX-TRF/6027AX-72RF User's Manual
3-3
Control Panel LEDs
The control panel located on the front of the SC829BTQ chassis has five LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and any
corrective action you may need to take.
2
NIC2
Indicates network activity on LAN2 when flashing .
1
NIC1
Indicates network activity on LAN1 when flashing.
Informational LED
Continuously on and blue: UID function has been activated.
Flashing red: Fan failure.
Continuously on and red: Overheat condition. This may be caused by cables ob-
structing the airflow in the system or the ambient room temperature being too warm.
Check the routing of the cables and make sure all fans are present and operating
normally. You should also check to make sure that the chassis covers are installed.
Finally, verify that the heatsinks are installed properly. This LED will remain flashing
or on as long as the overheat or fan failure condition exists.
3-2
Advertisement
Table of Contents
