Table of Contents
Advertisement
S
S
UPER
ERVER 6027AX-TRF/6027AX-72RF User's Manual
Force DDR3-1066, Force DDR3-1333, Force DDR3-1600, Force DDR3 1866, and
Force SPD.
tCL, tRCD, tRP
Use the above items to set the tCL (Cas Latency), tRCD (Row to Col Delay), and
Ras Precharge values. The options are Auto, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, and 18.
tRAS
Use this item to set the Ras Active Time value. The options are Auto, 12, 13, 14,
15, 16, 17, and 18.
tRRD
Use this item to set the minimum tRDD (Row Active to Row Active Delay) value.
The options are Auto, 19, 23, 27, 32, 36, and 41.
tRRD
Use this item to set the minimum tRDD (Row Active to Row Active Delay) value.
The options are Auto, 4, 5, 6, 7, and 8.
tWR
Use this item to set the minimum tWR (Write Recovery) time. The options are Auto,
3, 4, 5, 6, 7, and 8.
tRTP
Use this item to set the minimum internal tRTP (Read to Precharge) command delay
time. The options are Auto, 3, 4, 5, 6, 7 , and 8.
7-5
Event Logs
Use this feature to configure Event Log settings.
7-26
Advertisement
Table of Contents
