Connector Definitions - Supero SUPERSERVER 6027AX-TRF User Manual

S S
UPER ERVER 6027AX-TRF/6027AX-72RF User's Manual
5-8

Connector Definitions

Power Connectors
A 24-pin main power supply connector(JPW1)
and two 8-pin CPU PWR connectors
(JPW2/2) are located on the motherboard.
These power connectors meet the SSI EPS
12V specification. These power connectors
must also be connected to your power
supply. See the table on the right for pin
definitions.
Warning: To provide adequate
power supply to the motherboard,
be sure to connect the 24-pin ATX
PWR (JPW1) and two 8-pin PWR
connectors (JPW2, JPW3) to the
power supply. Failure to do so will
void the manufacturer warranty
on your power supply and moth-
erboard.
Power Button
The Power On connection is on pins 1 and
2 of JF1. These should be connected to the
chassis power button. See p. 5-4 and the
table on the right for pin definitions.
Reset Button
The Reset Button connection is located on
pins 3 and 4 of JF1 and attaches to the reset
switch on the computer chassis. See p. 5-4
and the table on the right for pin definitions.
ATX Power 24-pin Connector
Pin# Definition Pin #
13
14
15
16
17
18
19
20
21
22
23
24
12V 8-pin PWR Connector
Pins
1 through 4
5 through 8
Pin Definitions (JF1)
Pin#
1
2
Pin Definitions (JF1)
Pin#
3
4
5-16
Pin Definitions
Definition
+3.3V 1 +3.3V
-12V 2 +3.3V
COM 3 COM
PS_ON 4 +5V
COM 5 COM
COM 6 +5V
COM 7 COM
Res (NC) 8 PWR_OK
+5V 9 5VSB
+5V 10 +12V
+5V 11 +12V
COM 12 +3.3V
Pin Definitions
Definition
Ground
+12V
(Required)
Power Button
Definition
Power Signal
Ground
Reset Button
Definition
Reset
Ground