Answering Calls; Ending Active Calls - Polycom IP 7000 User Manual

Answering Calls

Note

Ending Active Calls

Note
— If you do not know the contact's speed dial index number, scroll to the
contact, and then press the Dial soft key.
The call is placed.
To answer a call:
>>
Press or the Answer soft key.
The three LEDs flash green when the phone rings.
To ignore Incoming calls, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines). To prevent your phone from ringing, enable the
Do Not Disturb feature (see
You can forward incoming calls by pressing the Forward soft key (see
Forwarding Calls Dynamically
If you set up your phone with a silent ring, press the Answer soft key to answer the
call.
To answer a call on a shared line:
Answer the incoming call.
1.
Press the Hold soft key.
2.
Anyone on another phone configured to use the same shared line can take the
call by selecting the call on their phone screen.
To end a call:
>>
Press or the End Call soft key.
You cannot end a call that is on hold until you resume the call. To end a call on hold,
press the Resume soft key, and then end the call.
Using Do Not Disturb on page 3-19).
on page 3-18).
3 - 4