Power And Startup - Polycom IP 7000 User Manual

Power and Startup

Symptom
The display shows "Network Link
is Down."
Problem
The network cable is not properly
connected.
Corrective Action
Verify that the network cable is properly
connected:
• Check the cable termination at the
switch or hub (furthest end of the
cable from the phone).
• Check that the switch or hub is
operational (flashing link/status
lights).
• Check if the LAN port is active or
inactive. Press the Menu key, and
then select Status > Network >
Ethernet. From the Ethernet screen,
scroll to LAN port and verify that it is
Active.
• To attempt re-registration with the call
server, reboot the phone. For more
information, see your system
administrator.
• Contact your system administrator.
4 - 2