Splitting Conferences; Ending Conferences; Using Conference Bridges; To Call Into A Conference Bridge - Polycom IP 7000 User Manual

Splitting Conferences

Ending Conferences

Using Conference Bridges

• To end the conference call and split the conference into two separate calls
on hold, press the Split soft key.
When a conference has been established, a Split soft key is available. When
you split a conference, you end the conference and put all parties on hold.
To split a conference:
>>
From the Active:Conference screen, press the Split soft key.
The conference ends, and all calls are split into individual calls and put on
hold.
You can end a conference, and your connection to the other parties, by
pressing the End Call soft key. When you use the End Call soft key, the other
parties remain connected.
To end a conference:
>>
From the Active:Conference screen, press the End Call soft key.
The two other parties remain connected.
A key business tool, the conference bridge allows users with an extension and
voicemail passwords to schedule and manage conference calls. Basic
functionality includes the ability to create and log into conference bridges.
There are also administrator modes that allow calling out and dropping
parties from the bridge.
Conference bridge supports up to 20 connected callers. An unlimited number
of conference bridges can be in session at the same time.

To call into a conference bridge:

Internal:
Dial 556.
1.
Follow the Conference Bridge voice prompts.
2.
3 - 13