Connecting Network And Power Sources; Power Over Ethernet; Ac Power - Polycom IP 7000 User Manual

Connecting Network and Power Sources

Note
There are two ways to connect your phone to the network and a power source.
Your system administrator can tell you which of the following methods best
suits your teleconferencing needs:
• Power over Ethernet (PoE)
•

AC Power

Power over Ethernet

Power over Ethernet is the default connection for your phone.
AC power adapters are not included in the PoE package. If you require one, see
your system administrator.
To connect the phone using a PoE source:
1. Connect one end of the 25-foot Network Cable to the LAN jack on the
phone.
Connect the other end of the 25-foot Network Cable to an available LAN
2.
port on the wall or hub/switch device port.
AC Power
To connect your phone to the network using AC power, make sure you have
the optional AC Power Kit. The AC Power Kit contains a Power Adapter,
Regional Power Cord, and a Power Insertion Cable.
To connect the phone using AC power:
Connect one end of the 25-foot Network Cable to the LAN jack on the
1.
phone.
Connect the other end of the 25-foot Network Cable to the
2.
Power Insertion Cable.
Connect the Power Insertion Cable to an available LAN port on the wall
3.
or hub/switch device port.
Connect the Power Adapter to the Power Insertion Cable.
4.
Connect the Power Adapter (with the attached Regional Power Cord) to
5.
the wall outlet.
1 - 3