Muting Conference Call Participants; Placing Conference Call Participants On Hold - Polycom IP 7000 User Manual

Conference Call Participants
• Info—Provides additional information about the selected participant.
• Far Mute—Mutes the selected participant. The muted participant can hear
all participants, but no participant can hear the muted participant.

Muting Conference Call Participants

To mute a conference call participant:
>>
From the Manage Conference screen, scroll to the participant you want to
mute, and then press the Far Mute soft key.
The following figure shows the far mute feature applied to James Smith. The
"far mute" icon displays next to his name, and the UnMute soft key appears.
The muted participant can hear all participants, but no participant can hear the
muted participant.
If you press instead of the Far Mute soft key, all other participants can
hear each other, but they cannot hear you. When you press
glow red.
To un-mute the participant, press the UnMute soft key.

Placing Conference Call Participants on Hold

You can select a conference call participant and place the participant on hold.
You can return the participant to the conference at any time by pressing the
Resume soft key.
If you want to place a conference call on hold, see
Conferences on page 3-12.
To place a conference call participant on hold:
>>
From the Manage Conference screen, scroll to the participant you want to
place on hold, and then press the Hold soft key.
on page 3-11.)
Holding and Resuming
, the LEDs
3 - 10