Performance Edit
MFX1
Here you can set the effect parameters for the master effect 1
you selected in the MFX page MFX & EQ Routing.
( "MFX1 (Mod.) (Master Effect1–Modulation) List" on
page 117)
MFX2
Here you can set the effect parameters for the master effect 2
that you selected in the MFX page MFX & EQ Routing.
( "MFX2 (Rvb/Dly) (Master Effect2–Revreb/Delay) List" on
page 119)
EQ
The master EQ is a three‐band stereo EQ. This is located
immediately before the L/R bus is output from the AUDIO
OUTPUT L and R jacks, and is used for overall equalizing
(using the EQ to adjust the tonal character). ( "EQ (Equal‐
izer)" on page 120)
12