Korg PS60 Parameter Manual page 130

Appendices
LFO Frequency (page 51)
The frequency of LFO 1, 2 or Common LFO can be con‐
trolled by the EG, keyboard tracking, controllers, or tempo
etc.
You can also use the LFO2 frequency to modulate LFO1, or
use the Common LFO frequency to modulate LFO 1/2.
If Intensity is set to a value of 16, 33, 49, 66, 82, or 99, the cor‐
responding frequency can be multiplied by a maximum of
2, 4, 8, 16, 32, or 64 times (or divided by 1/2, 1/4, 1/8, 1/16, 1/
32, 1/64).
• Select JS +Y:CC#01 for AMS, and set Intensity to +16.
When you move the joystick in the +Y direction, the LFO
frequency will be increased by a maximum of 2 times. If
you set Intensity to –16 and move the joystick in the +Y
direction, the LFO frequency will be decreased by up to
1/2.
LFO Frequency AMS Intensity (page 52)
You can use the EG, keyboard tracking, controllers, or
tempo etc. to control the intensity of the AMS that controls
the frequency of the LFO 1, 2, or Common LFO.
For example if you're using the pitch EG to modulate the
LFO frequency, you could use a separate AMS to control the
depth of this effect.
• If a foot switch connected to the DAMPER/PEDAL/SW1
or PEDAL/SW2 jack is selected as "AMS," the pitch EG
will lightly modulate the LFO frequency when the foot
switch is off; the pitch EG will deeply modulate the LFO
frequency when the foot switch is on.
LFO Shape (page 51)
You can use a EG, keyboard tracking, controllers, or tempo
etc. to control the shape of the LFO 1, 2, or Common LFO
waveform. You can also use the LFO2 frequency to modu‐
late LFO1, or use the Common LFO frequency to modulate
LFO 1/2.
• You can control the LFO waveform by setting AMS to a
controller such as JS+Y, and using the controller when
desired.
Common LFO Reset (page 54)
You can use a controller or tempo etc. to reset the Common
LFO.
• By setting AMS to Gate 1, you can make the Common
LFO reset when a note is played from a state in which all
notes are off. For example, this will ensure that a filter
sweep always starts from the same place.
You can set AMS to a controller such as JS+Y: CC#01, and
use the controller when you want to reset the LFO.
126