Memory Protect - Korg PS60 Parameter Manual

Global
overall sound, or to back off the high range to soften the
sound.

Memory Protect

Program
This setting protects the internal program memory.
On: Internal program memory will be protected, and the
following write operations cannot be performed.
• Writing a program
• Loading preloaded program data
• Receiving program data via MIDI data dump
Off: Data can be written to internal program memory.
Performance
This setting protects the internal performance memory.
On: Internal performance memory will be protected, and
the following write operations cannot be performed.
• Writing a performance
• Loading preloaded performance data
• Receiving performance data via MIDI data dump
Off: Data can be written to internal performance memory.
72
MIDI
Here, you can adjust MIDI‐related settings that affect the
entire PS60.
[Off, On]
Basic
MIDI Channel (Global MIDI Channel)
Sets the global MIDI channel. The global MIDI channel is
used in the following cases.
• When you switch performances.
• When controlling timbres or effects that have been set to
Gch in various modes
• When transmitting and receiving System Exclusive
[Off, On]
messages
MIDI received
Performances can be switched by program changes received
on the global MIDI channel (page 73).
Use the global MIDI channel if you want to turn All IFXs
(CC#92), MFX1&2 (CC#94) on/off via MIDI.
MIDI output when playing the PS60
In Performance, this data will be transmitted simultane‐
ously on the global MIDI channel and on the MIDI channels
of timbres whose "Status" (page 7) is set to EXT or EX2.
Local Control On
On: Youʹll be able to use the PS60's knobs, keyboard, or joy‐
stick etc. to control the PS60's sound generator section.
Choose the On setting if youʹre playing the PS60 by itself.
Off: The PS60's knobs, keyboard, and joystick etc. will be
internally disconnected from the tone generator section.
This means that your performance on the PS60 (i.e., opera‐
tions of the keyboard or joystick) will not produce sound.
Choose the Off setting if echo‐back from your external
sequencer is causing each note to be sounded twice.
If Local Control is Off, MIDI transmission/reception
will occur normally. Playing the keyboard will cause
the corresponding note data to be transmitted, and
received note data will play the PS60's internal sounds.
Convert Position
This setting specifies the location where the Transpose and
Velocity Curve settings will be applied. This setting will
affect the MIDI data that is transmitted and received.
When using the PS60's keyboard to play the internal tone
generator, the Transpose, Velocity Curve, and aftertouch
Curve settings will always take effect regardless of this set‐
ting.
PreMIDI: Velocity Curve, and Transpose will be applied to
the data that is transmitted from the PS60's keyboard.
This means that the Velocity Curve, and Transpose settings
will affect the data that is transmitted from MIDI OUT when
the PS60's keyboard is played.
MIDI data received from MIDI IN will not be affected.
Local
OFF
Control
ON
MIDI IN
MIDI OUT
[PreMIDI, PostMIDI]
[1...16]
[Off, On]
Tone
generator