Memory - Recall Of The Measurements; Clearing The Memory; Stop Printing; Print Last Stored Measurement - Microlife Premier Automatic Blood Pressure Monitor Instruction Manual

5.7. Memory – recall of the measurements
This blood pressure monitor automatically stores each of the last 30 measurement values
separately for 2 users. By pressing the MEMORY button, the last measurement as well as
previous 29 measurements (MR29, MR28, ...MR1) can be displayed one after the other.
Data obtained in Average Mode is indicated by an "A" symbol. If the memory is full, the
next measurement will be added to memory and the oldest reading (MR 1) will be deleted.
Average
Reading
Memory
5.8. Clearing the Memory – cancellation of all measurements
Attention! Before you delete all readings stored in the memory, make sure you won't need to
refer to the readings at a later date. Keeping a written record is prudent and may provide addi-
tional information for your next physician visit. A log is included to record a history of your measurements.
In order to delete all stored readings, press the MEMORY button for at least 7 seconds. The display
will show the symbol "CL" and 3 short beeps will sound to indicate deletion of stored readings.
(Unit must be turned on.)
6. Printer Functions – Printer sold separately as an accessory
This unit can be used in connection with the Microlife diagnostic printer. When used in conjunction with the
Diagnostic Printer, your blood pressure monitor will print out measurements stored in the memory by simply press-
ing the PRINTER button. Please make sure you set the unit to User 1 or User 2 based on the data you want to print.
6.1. How to print the last stored measurement. (One reading)
a) Connect the printer to the monitor as illustrated and switch the printer on (for details please
refer to the manual of the printer).
b) Click the PRINTER button of the monitor once. The display will show "Pr1"
and the printer will print the last stored measurement for User 1 or 2
based on your selection.
.
6.2. How to print All measurements stored in memory and a data chart.
a) Connect the printer with the monitor as illustrated and switch the
printer on (for details please refer to the manual of the printer).
b) Press the PRINTER button for at least 3 seconds.
The display will show "Pr1" followed by "Pr2".
c) Release the button, and the printer will print all
stored measurements with a corresponding chart.

6.3. Stop printing

If you want to stop printing,
click the PRINTER button
during the printing process.
Date
mmHg
mmHg
30 30
MR MR
1 1
(MR 30 is the value of
User 1
the last measurement.)
(Unit should be turned on first)
Time
mmHg
mmHg
29
MR
(MR 29 is the value of the
measurement before MR 30.)
1
Alternating Display
mmHg
mmHg
29
MR
1 1
1
1
mmHg
mmHg
1
1
11