Measurement Mode Selection (Single Or Average Mode) - Microlife Premier Automatic Blood Pressure Monitor Instruction Manual

5.4. Measurement mode selection
Clinical studies demonstrate taking multiple blood pressure readings and calculating an "average" is more
likely to determine your true blood pressure. Your Microlife Average Mode unit allows you to switch the unit to
an Average Mode setting that automatically takes multiple readings!
Average Mode Slide Switch:
a) If you would like to take an Average Mode
measurement, move the slide switch to the right.
b) Average Mode takes 3 measurements in
succession and calculates the result. An "A"
symbol in the display indicates that the unit is
set to the Average Mode.
c) There will be 45 seconds resting time in-between each
measurement. The unit will count down from 45 seconds.
A beep will sound at the last 5 seconds to remind you that
the unit is about to take another measurement.
Single mode
a) If you would like to take a single mode measurement, please
move the slide switch to the left.
b) Single mode only has 1 measurement.
Note: Before proceeding make sure the unit is turned on.
User Selection
This advanced blood pressure monitor allows you to track blood pressure readings for 2 individuals
independently.
a) Before taking your measurement, make sure you set the unit for the intended user. (User 1, User 2)
b) The unit is set to User 1. Click the User/Time button to change to User 2. The symbol indicates user 1 or
user 2.
c) Click the User/Time button again to change into User 1.
1
User 1 symbol
2
User 2 symbol
9