Components Of Your Blood-Pressure Monitor; Operation Of Your Blood Pressure Monitor; Inserting The Batteries; Cuff Connection - Microlife Premier Automatic Blood Pressure Monitor Instruction Manual

3. COMPONENTS OF YOUR BLOOD PRESSURE MONITOR
The upper arm cuff included
with your monitor is
model S101. It is for arm
circumferences of 20-32 cm 8
11/16" – 11 13/16").
Please Note: Do not force
the cuff connection into the
opening. Make sure the cuff
connection is not pushed
into the AC adapter port. If the
cuff is too small, call Microlife
USA for further information.
Larger cuffs are available.

4. OPERATION OF YOUR BLOOD PRESSURE MONITOR

4.1 Inserting the batteries

After you have unpacked your device, insert the batteries. The battery
compartment is located on the back side of the device (see illustration).
a) Remove cover from the bottom plate, as illustrated.
b) Insert the batteries (4 x size AA ). Always use AA long life batteries
or alkaline 1.5v batteries. Do not use rechargeable batteries.
c) If a battery warning appears in the display, the batteries are discharged and
must be replaced.
Attention!
• After the battery warning appears, the device is blocked until the batteries have been replaced.
• If the blood pressure monitor is left unused for long periods, please remove the batteries from the device.
Functional check: Hold on the ON/OFF (0/I) button down to test all the display elements. When functioning
correctly all segments must appear.
4.2. Using an AC adapter (optional accessory sold separately)
It is possible to operate this blood pressure instrument with a Microlife AC adapter (output 6 V DC / 600 mA
with DIN plug).
a) Insert the AC adapter plug into the socket at the left side of the instrument.
b) Plug the AC adapter into a power socket. Test that power is available by pressing the ON/OFF (0/I) button.
Note: No power is taken from the batteries while the AC adapter is connected to the instrument. If power is
interrupted during the measurement, (e.g. by accidental removal of the AC adapter from the socket) the
instrument must be reset by removing the plug from its socket and re-inserting the
connectors. Please consult Microlife if you have questions relating to the AC adapter.

4.3. Cuff connection

Insert the cuff tube into the opening provided on the left side of the instrument,
as shown in the diagram.
AC Adapter and Cuff Connection
(AC Adapter sold separtely)
Printer
(Printer sold
separately)
User 1 or 2
and Set Time/Date
Start
Memory
Systolic
Diastolic
Pulse
ON/OFF
Select 1 Measurement
or Select 3 Measurement
5