Configuring Stun Services; D14049.04 - TANDBERG VCS Administrator's Manual

Grey Headline (continued)
Configuring the VCS as a Traversal Server

Configuring STUN Services

To configure the STUN Binding Discovery and
STUN Relay services:
•
VCS Configuration > Expressway > STUN.
You will be taken to the STUN page.
•
xConfiguration Traversal Server
STUN
Overview and
Introduction Getting Started
Status

D14049.04

JULY 2008
STUN Services
System VCS Zones and
Configuration Configuration Neighbors
Call Bandwidth
Processing Control
163
TANDBERG VIDEO COMMUNICATIONS SERVER
STUN Discovery Mode
Determines whether the VCS will offer STUN
Discovery services to traversal clients.
STUN Discovery Port
Specifies the port on the VCS on which it will
be listening for STUN Discovery requests.
STUN Relay Mode
Determines whether the VCS will offer STUN
Relay services to traversal clients.
STUN Relay Port
Specifies the port on the VCS on which it will
be listening for STUN relay requests.
STUN Relay Media port range start
Specifies the lower port in the range to be used
for STUN media relay.
STUN Relay Media port range end
Specifies the upper port in the range to be
used for STUN media relay.
Save
Click here to save your changes.
Firewall
Applications Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices