TANDBERG VCS Administrator's Manual page 229

Video communication server
Hide thumbs Also See for VCS:
Table of Contents

Advertisement

Grey Headline (continued)
Command Reference - xConfiguration
Traversal Server Media Demultiplexing RTP Port: <1024..65534>
Specifies the port on the VCS to be used for demultiplexing RTP media. Note: You must restart the system for any changes to take effect.
Default: 2776
xConfiguration Traversal Server Media Demultiplexing RTP Port: 2776
Example:
Traversal Server STUN Discovery Mode: <On/Off>
Determines whether the VCS will offer STUN discovery services to traversal clients.
Default: On
xConfiguration Traversal Server STUN Discovery Mode: On
Example:
Traversal Server STUN Discovery Port: <1024..65534>
Specifies the port to be used for STUN discovery services.
Default: 3478
xConfiguration Traversal Server STUN Discovery Port: 4678
Example:
Traversal Server STUN Relay Media Port End: <1024..65534>
Specifies the upper port in the range to be used for STUN media relay.
Default: 61200
xConfiguration Traversal Server STUN Relay Media Port End: 61200
Example:
Traversal Server STUN Relay Media Port Start: <1024..65534>
Specifies the lower port in the range to be used for STUN media relay.
Default: 60000
xConfiguration Traversal Server STUN Relay Media Port Start: 60000
Example:
Traversal Server STUN Relay Mode: <On/Off>
Determines whether the VCS will offer STUN relay services to traversal clients.
Default: On
xConfiguration Traversal Server STUN Relay Mode: On
Example:
Traversal Server STUN Relay Port: <1024..65534>
Specifies the listening port for STUN relay requests.
Default: 4678
Traversal Server STUN Relay Port: 4678
Example:
Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: <1..100000000>
Specifies the bandwidth limit (in kbps) for any one call to or from an endpoint in the Default Subzone (applies only if Mode is set to Limited).
Default: 1920
xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: 1920
Example:
Overview and
Introduction
Getting Started
Status
D14049.04
JULY 2008
System
VCS
Zones and
Configuration
Configuration
Neighbors
Call
Bandwidth
Processing
Control
229
TANDBERG
VIDEO COMMUNICATIONS SERVER
Firewall
Applications
Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices

Advertisement

Table of Contents
loading

Table of Contents