TANDBERG VCS Administrator's Manual page 263

Grey Headline (continued)
Command Reference - xStatus
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from gatekeeper/DNS resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalClient: {Visible if Type is TraversalClient}
Peer [1..6]:
H323: {Visible if H323 Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from gatekeeper/DNS resolution failed/Invalid alias/Authentication Failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from neighbor/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalServer: {Visible if Type is TraversalServer}
SIP:
Port: <Active/Inactive>
H323:
Port: <Active/Inactive>
Overview and
Introduction Getting Started
Status
D14049.04
JULY 2008
System VCS Zones and
Configuration Configuration Neighbors
Call Bandwidth
Processing Control
263
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices