TANDBERG VCS Administrator's Manual page 215

Grey Headline (continued)
Command Reference - xConfiguration
Authentication Database: <LocalDatabase/LDAPDatabase>
Selects between a local database and a remote LDAP repository for the storage of password information for authentication.
Default: LocalDatabase
xConfiguration Authentication Database: LocalDatabase
Example:
Authentication LDAP AliasOrigin: <LDAP/Endpoint/Combined>
Determines which aliases (i.e. from the
Combined: the endpoint will be registered both with the aliases which it has presented and with those configured in the LDAP repository.
Default: LDAP
xConfiguration Authentication LDAP AliasOrigin: LDAP
Example:
Authentication LDAP BaseDN: <S: 0, 255>
Specifies the Distinguished Name to use when connecting to an LDAP server.
xConfiguration Authentication LDAP BaseDN: "dc=example,dc=company,dc=com"
Example:
Authentication Mode: <On/Off>
Determines whether systems attempting to communicate with the VCS must authenticate with it first.
Off: incoming messages are not authenticated.
On: for H.323, any credentials in the message are checked against the authentication database. The message is allowed if the credentials match, or of there are no credentials in the
message. For SIP, any messages originating from an endpoint in a local domain will be authenticated.
Default: Off
xConfiguration Authentication Mode: Off
Example:
Authentication Password: <S: 0, 215>
Specifies the password to be used by the VCS when authenticating with another system, including when your VCS is a traversal client connecting to a traversal server. The maximum plaintext
length is 128 characters, which will then be encrypted.
xConfiguration Authentication Password: password123
Example:
Authentication UserName: <S: 0, 128>
Specifies the username to be used by the VCS when authenticating with another system, including when your VCS is a traversal client connecting to a traversal server.
xConfiguration Authentication UserName: <S: 0, 128>
Example:
Bandwidth Default: <64..2048>
Sets the bandwidth (in kbps) to be used on calls managed by the VCS in cases where no bandwidth has been specified by the endpoint.
Default: 384
xConfiguration Bandwidth Default: 384
Example:
Overview and
Introduction Getting Started
Status
D14049.04
JULY 2008
LDAP repository or the endpoint) should be used to register the endpoint.
System VCS Zones and
Configuration Configuration Neighbors
Call Bandwidth
Processing Control
215
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices