Table of Contents
Advertisement
Grey Headline (continued)
SNMP
Overview
About SNMP
Tools such as TANDBERG Management Suite
(TMS) or HP OpenView may act as SNMP
Network Management Systems (NMS). They
allow you to monitor your network devices,
including the VCS, for conditions that might
require administrative attention.
The VCS supports the most basic MIB-II tree
(.1.3.6.1.2.1) as defined in
RFC 1213
[23].
The information made available by the VCS
includes the following:
•
system uptime
•
system name
•
location
•
contact
•
interfaces
•
disk space, memory, and other machine-
specific statistics.
To allow the VCS to be monitored by an SNMP
NMS (including TMS), you must
Enable
SNMP
on the VCS and provide the name of the
SNMP community
within which it resides. You
may optionally provide the name of a
System
contact
and the physical
Location
of the
system for reference by administrators when
following up on queries.
By default, SNMP is
Disabled
with a
SNMP
community name
of public.
The VCS does not support SNMP traps
or SNMP sets, therefore it cannot be
managed via SNMP.
SNMP is disabled by default, because
!
of the potentially sensitive nature of the
information involved. Do not enable
SNMP on a VCS on the public internet or in any
other environment where you do not want to
expose internal system information.
Overview and
Introduction
Getting Started
Status
D14049.04
JULY 2008
To configure the VCS's SNMP settings:
•
System Configuration > SNMP
You will be taken to the
SNMP
page.
•
xConfiguration SNM
P
System
VCS
Zones and
Configuration
Configuration
Neighbors
Configuration
Call
Bandwidth
Processing
Control
60
TANDBERG
VIDEO COMMUNICATIONS SERVER
Enabled
Select
On
to enable SNMP support.
You must save your changes and
restart the system for any changes to
take effect.
SNMP community name
Sets the VCS's SNMP community name.
System contact
Specifies the name of the person who can be
contacted regarding issues with the VCS.
Location
Specifies the physical location of the VCS.
Restart
Click here to restart the system.
Save
Click here to save your changes.
Firewall
Applications
Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
